Release Time：2018/07/20   Browsing Times：39

Laser engraving processing as a new processing method, is gradually widely used in leather, textile and garment industry for its processing precision, fast, simple operation, high degree of automation.

Release Time：2018/07/12   Browsing Times：39

Laser engraving machine is generally used in wood products, plexiglass, stone, crystal, Corinne, paper, two-color plate, alumina, leather, resin and so on. However, laser engraving machines have problems when carving metal, the reasons are as follows:

Release Time：2018/07/05   Browsing Times：39

1.The laser light suddenly disappear when the machine is operating. A: Checking whether the water chiller has sent an alarm signal. a: If there is an alarm signal, connecting the Output and Inlet with one pipe and then checking if the alarm signal still appears. If the signal reappear, the water chiller may have problems. If the signal disappears, somethings may block the water flowing. Under the situation, please check if the water pipe was bend or pressed and confirm whether there have debris in water(replacing it with purified water).

Release Time：2018/04/11   Browsing Times：39

It is a new type of craft word, and it is also one of the highest technology craft word in terms of production requirement. It stands out in the craft word market with its extremely fine appearance, uniform illumination and high grade.

Release Time：2018/03/13   Browsing Times：39

Laser cutting means the laser emitted from the laser device, focusing into a laser beam with high power density through the optical path system. The laser beam hits the surface of the workpiece, so that the workpiece reaches the melting point or boiling point,